Finished Cemented Carbide Wire Drawing Dies with Steel Case

Model NO.: S13, R, W104, W105, etc Material: Cemented Carbide Hole Type: Round Mould Surface Treatment: Polish Certification: ISO Customized: Standard or Customised Types: S11, S13, R, W104, W105, 6X4, 9X6, 16X13, etc Transport Package: Standard Box Origin: Zhuzhou, Hunan Type: Tungsten carbide nib Shaping Mode: Compression Cavity: Multi-cavity Application: Hardware, Household Appliances, Electronic Warranty: 1 Year Grade: Yg3, Yg3X, Yg6, Yg6X, Yg8, Yg11, Yg15 Trademark: G&W Specification: 34 x 17 x 14 cm HS Code: 82072090
1. Our advantage
1 100% raw material
2 HIP Furnace Sintered 
3 High precision grinding
4 Bore size up to 0.1mm
5 Produce finished dies with steel case
6 Fast delivery
7 Professional manufacturer of tungsten carbide products with 20 years experience.
8 Complete Quality Control System and strict inspection.

2. Our Mould size
Type W
Type S11
Type S12
Type S13
Type 22
Type 23
Type S30
Type S40
Type S41
Type S42
Type S60
Type R

3. Grade recommendation

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Contact us if you need more details on Metal Stamping. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Tungsten Carbide Die、Screw Die. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Tungsten Carbide Drawing Die